interface tunnel,pe地址和ce地址

interface tunnel,pe地址和ce地址

一个是Tunnel GRE和IPSec一起使用，则包结构如下。又到了做实验的时候了。创建网桥如下：在虚拟机Instance01上ovs-vsctl add-br testbr ifconfig testbr 10.0.0.1/24 ovs-vsctl 1.1.5 tunnel source 1IPv6隧道命令参考1.1IPv6隧道命令1.1.1 interface tunnel interface tunnel命令用来创建隧道并进入接口视图，如果指定的隧道已经存在，则直接进入隧道视图，不需要再创建隧道。

╯△╰ 网络释义1. 接口h3c AR路由器DVPN穿越NAT典型配置dvpn policy 1 / 视图1/interface Tunnel0 /接口/ net527.cn|基于13个网页2. 隧道逻辑接口上口IPv4interface tunnel number 2 配置隧道的源地址tunnel source ip add|type number 3 配置隧道的目的地址tunnel destination hostnamd|ip-address 4 可选配置

home1600(config-if)#tunnel destination 192.168.114.2 home1600(config-if)# %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to interface Tunnel0 ip address 10.0.0.1 255.255.255.0 tunnel source 12.1.1.1 tunnel destination 23.1.1.3 ! interface FastEthernet1/0 ip address 12.1.1.1 255.255.255

redirect interface tunnel 命令功能redirect interface tunnel命令用来在流行为中创建将报文重定向到GRE隧道或者MPLS隧道接口的动作。undo redirect interf..pany1(config)#interface tunnel 0 Set an IPv6 address on thetunnelinterface: company1(config-if)#ipv6 address 2001:db8:1a2b:22::345c:de67/64 Define the source of the packets being

ipv6 ospfv3 tunnel interface Tunnel0 no ip address ipv6 address 2026::34:1/122 ipv6 ospf 6 area 34 tunnel source 10.1.1.1 tunnel destination 10.1.1.2 ! interface tunnel1口配置interface Tunnel1ip address 172.16.1.2 255.255.255.0tunnel source 61.100.1.1tunnel mode ipsec ipv4相比于之前演示的Gre模式，封装模式修改